「工业推拉门配件」厂房平移门拉不动的原因-推拉门修理 -工业门配件/门边/吊轮/吊轨/扭簧/绳轮/包角/快速门配件

六合宝典

最新优惠:
推拉门配件批发,工业平移门配件,电动提升门配件,车库门弹簧,75工业门边,工业门扭簧,工业门包角,工业门门边
全国服务热线:联系我们  
400-6080-090   
  • 工业快速门配件商城
  •   
  • 全国热线:400-6080-090
  •   
  • 联系人:于经理
  •   
  • 手机:13889331181(媒体勿扰)
  • 您现在的位置是   六合宝典>>最新资讯 >> 「工业推拉门配件」厂房平移门拉不动的原因-推拉门修理

      「工业推拉门配件」厂房平移门拉不动的原因-推拉门修理

      作者:厂房推拉门维修配件更换   时间:2019/8/24 9:28:35
    •  

      「工业推拉门配件」厂房平移门拉不动的原因-推拉门修理


      Reasons for the Instability of the Translational Door of Industrial Push-and-Pull Door Fittings-Repair of the Push-and-Pull Door




      厂房推拉门厂家剖析推拉门拉不动怎么弄:


      Factory Push-pull Door Manufacturer Analysis Push-pull Door can not move how to do:


      1、当推拉门呈现对不上卡槽的情况时,说明上下滑道现已呈现偏移轨迹的情况,在这种情况下,推拉门自然会无法推进,因而要让滑轮滑块,尽量削减摩擦力才可以,你要做的就是整理滑到的污渍。


      1. When the sliding door is not in the slot, it shows that the upper and lower slideways are now showing a migration track. In this case, the sliding door will naturally not be able to move forward, so the pulley block should be allowed to reduce friction as much as possible. All you have to do is to clean up the stains.

       

       

      沈阳厂房电动推拉门




      2、滑道整理洁净后,查看滑道与滑轮触摸之处是否有东西阻碍,从而增大了它们之间的摩擦力,比方类似通明胶带的塑料纸,或是一些现已呈现爆皮现象的地方,有的话将杂物整理洁净。


      2. After cleaning the slideway, check if there are any obstacles in the touching area between the slideway and the pulley, thus increasing the friction between them, such as plastic paper with gelatin tape, or some places where the phenomenon of skin explosion has now appeared, or if there is any, clean up the debris.


      3、即使是推拉门呈现滑块现象,开关处也别忘了处理。在卡扣与卡槽对不齐的情况下,要想方法进行调整,一般情况下,用螺丝刀调节螺丝后,就可以对卡槽方位进行操控。


      3. Don't forget to deal with the switch even if the slider appears in the sliding door. In the case of uneven snap and slot, in order to adjust the method, in general, after adjusting the screw with a screwdriver, the orientation of the slot can be manipulated.


      4、弄好之后,记得把推拉门缝隙当中的污渍整理洁净,这样就可以使用了。


      4. After finishing, remember to clean up the stain in the gap of the sliding door, so that it can be used.


      但如果是厂房推拉门的滑轮损坏了,就要找人员上门换滑轮,别自己拆装。


      But if the pulley of the sliding door of the factory building is damaged, it is necessary to find people to change the pulley at the door and not disassemble and assemble by themselves.


      本厂专业生产厂房提升门,大型推拉门,平开门,批发各种工业门配件,价格低廉,欢迎新来客户来电订购。


      Our factory specializes in manufacturing Lifting doors, large sliding doors, flat doors, wholesale all kinds of industrial door accessories, low prices, welcome new customers to order.

    百度地图 - 网站地图 - 北京赛车pk10 北京赛车 北京赛车 北京赛车 六合宝典 北京赛车pk10 北京赛车 六合宝典 六合宝典 北京赛车